Tool Holder
-
Meiwha Inner Oil Colling Holder
Product hardness: 58HRC
Product material: 20CrMnTi
Product water pressure: ≤160Mpa
Product rotational speed:5000
Applicable spindle: BT30/40/50
Product feature: External cooling to internal cooling, center water outlet.
-
MeiWha Driven Tool Holder
Wide application: CNC Late, Injection Molding Machine, Steel Device, Feeder
Various specifications, easy installation, wide compatibility
-
CNC Machine Center Cutting Tools Chip Cleaner Remover
Meiwha CNC chip cleaner helps machining center clean chips save time and superefficient.
-
Shrink Fit Tool Holder
Meiwha Shrink fit holder with superior gripping power virtually becomes an integral cutting tool, eliminating runout error, tool deflection, vibration and slippage.
-
CNC Machine Side Milling Head Universal Angle Head Tool Holder BT & CAT & SK Standards
3500-4000 rpm Maximum Speed; 45 Nm Maximum Torque; 4 kW Maximum Power.
1:1 Input to Output Gear Ratio
0°-360° Radial Adjustment
CAT /BT/BBT/HSK Taper Shank; For ER Collets
Includes: Angle Head, Collet Wrench, Stop Block, Allen Key
-
BT-ER Holder
Spindle model: BT/HSK
Product hardness: HRC56-58
True roundness:＜0.8mm
Overall jumping accuracy: 0.008mm
Product material: 20CrMnTi
Dynamic balancing speed: 30,000
-
BT-C Powerful Holder
Product hardness: HRC56-60
Product material: 20CrMnTi
Application: Widely used in CNC machining centers
Installation: simple structure; easy to install and dissemble
Function: Side milling
-
BT-APU Integrated Drill Chuck
Product hardness: 56HRC
Product material: 20CrMnTi
Overall clamping: ＜0.08mm
Depth of penetration: ＞0.8mm
Standard speed of rotation: 10000
True roundness: ＜0.8u
Clamping range: 1-13mm/1-16mm
-
BT-SLA Side Lock End Mill Holder
BT-SLA Side Lock Holder is side-locking holder for holding shank of milling cutter, can be used for general milling, with screw holes on the side of the holder to clamp the milling cutter.
-
Angle Head Holder
Mainly used for machining centers and gantry milling machines. Among them, the light type can be installed in the tool magazine and can be freely converted between the tool magazine and the machine spindle; the medium and heavy types have greater rigidity and torque, and are suitable for most machining requirements. Because the angle head expands the performance of the machine tool, it is equivalent to adding an axis to the machine tool. It is even more practical than the fourth axis when some large workpieces are not easy to flip or require high precision.
-
BT-SDC Back Pull Handle
Product hardness:HRC55-58°
product material:20CrMnTi
Overall clamping:＜0.005mm
Depth of penetration:＞0.8mm
Speed of rotation: G2.5 25000RPM
-
HSK(A)-GC High-speed powerful Holder
There are 24 types of BT tool holders. Commonly used ones are: BT-SK High Speed Tool Holder, BT-GER High Speed Tool Holder, BT-ER Elastic Tool Holder, BT-C Powerful Tool Holder, BT-APU Integrated Drill Chuck, BT -FMA Face Milling Tool Holder, BT-FMB-Face Milling Tool Holder, BT-SCA Side Milling Tool Holder, BT-SLA Side Milling Tool Holder, BT-MTA Morse Drill Holder, BT-MTB Morse Taper Tool Holder, BT Oil Path Tool Holder, BT-SDC Back Pull Type Tool Holder.
