BT-FMB Face Mill Holder

Short Description:

Product hardness:HRC56°

product material:20CrMnTi

Depth of penetration:>0.8mm

Product Taper: 7:24

Send email to us

Product Detail

Product Tags

There are three types of Meihua CNC BT tool holder: BT30 tool holder, BT40 tool holder, BT50 tool holder.

The material: using titanium alloy 20CrMnTi, wear-resistant and durable. The hardness of the handle is 58-60 degrees, the accuracy is 0.002mm to 0.005mm, the clamping is tight, and the stability is high.

Features: Good rigidity, high hardness, carbonitriding treatment, wear resistance and durability. High precision, good dynamic balance performance and strong stability. The BT tool holder is mainly used for clamping the tool holder and the tool in drilling, milling, reaming, tapping and grinding. Choose high-quality materials, after heat treatment, it has good elasticity and wear resistance, high precision and stable performance.

During machining, specific demands for tool holding are laid down by each industry and application. The range varies from high-speed cutting to heavy roughing.

With the MEIWHA tool holders, We offers the right solution and tool clamping technology for all specific requirements. Therefore, each year we invest approximately 10 percent of our turnover in research and development.

Our primary interest is to offer our customers sustainable solutions which enable a competitive advantage. This way, you can always maintain your competitive advantage in machining.

Product Parameter

Cat.No		Size
Cat.No		d1	D	L1	L2	L	K1	K2
BT/BBT30	FMB22-45	22	48	45	18	111.4	4.8	10
	FMB27-45	27	60	45	20	113.4	5.8	12
	FMB32-45	32	78	45	22	115.4	6.8	14
BT/BBT40	FMB22-45	22	48	45	18	128.4	4.8	10
	FMB22-60	22	48	60	18	143.4	4.8	10
	FMB22-100	22	48	100	18	183.4	4.8	10
	FMB22-120	22	48	120	18	205.4	4.8	10
	FMB22-150	22	48	150	18	233.4	4.8	10
	FMB22-200	22	48	200	18	283.4	4.8	10
	FMB22-250	22	48	250	18	283.4	4.8	10
	FMB22-300	22	48	300	18	333.4	4.8	10
	FMB27-45	27	68	45	20	128.4	5.8	12
	FMB27-60	27	68	60	20	143.4	5.8	12
	FMB27-100	27	68	100	20	183.4	5.8	12
	FMB27-150	27	68	150	20	233.4	5.8	12
	FMB32-60	32	78	60	22	143.4	6.8	14
	FMB32-100	32	78	100	22	183.4	6.8	14
	FMB32-150	32	78	150	22	233.4	6.8	14
	FMB40-60	40	80	60	25	150.4	8.3	16
	FMB40-100	40	80	100	25	190.4	8.3	16
	FMB40-150	40	80	150	25	240.4	8.3	16
BT/BBT50	FMB22-60	22	48	60	18	164.8	4.8	10
	FMB22-100	22	48	100	18	201.8	4.8	10
	FMB22-150	22	48	150	18	269.8	4.8	10
	FMB22-200	22	48	200	18	319.8	4.8	10
	FMB22-250	22	48	250	18	369.8	4.8	10
	FMB27-60	27	60	60	20	176.8	5.8	12
	FMB27-100	27	60	100	20	201.8	5.8	12
	FMB27-150	27	60	150	20	269.8	5.8	12
	FMB27-200	27	60	200	20	319.8	5.8	12
	FMB32-60	32	78	60	22	176.8	6.8	14
	FMB32-100	32	78	100	22	201.8	6.8	14
	FMB32-150	32	78	150	22	269.8	6.8	14
	FMB40-60	40	89	60	25	176.8	8.3	16
	FMB40-100	40	89	100	25	201.8	8.3	16
	FMB40-150	40	89	150	25	269.8	8.3	16

Meiwha Face Milling Holder

Stable & Anti-Shake / High Concentricity / Large Clamping Force

Strong torque transmission capability

By transmitting torque through the driving key, it is much more reliable than the tool holder (such as ER collet) that relies solely on friction for clamping. It can fully meet the requirements of heavy cutting in face milling.

Modularization and Efficiency

The cutter head can be quickly installed and disassembled by tightening the screws. It is very convenient to replace the cutter head or switch the blades, significantly reducing the time required for changing the blades.

Extremely high rigidity and stability

The massive structure and the end face tensioning method enable it to withstand huge cutting forces, effectively suppressing vibration and flutter. This is the prerequisite for achieving deep and large feed milling.