Threaded Milling Cutter
Full Teeth Thread Milling Cutter:
| Size | TPI | d1 | L1 | D | L | F |
| M3 | 0.5 | 2.4 | 6.0 | 4.0 | 50 | 4 |
| M4 | 0.7 | 3.15 | 8.0 | 4.0 | 50 | 4 |
| M5 | 0.5 | 4.0 | 10 | 4.0 | 50 | 3 |
| M5 | 0.8 | 4.0 | 10 | 4.0 | 50 | 4 |
| M6 | 0.75 | 4.8 | 12 | 6.0 | 60 | 3 |
| M6 | 1.0 | 4.8 | 12 | 6.0 | 60 | 4 |
| M8 | 0.75 | 6.0 | 16 | 6.0 | 60 | 3 |
| M8 | 1.0 | 6.0 | 16 | 6.0 | 60 | 3 |
| M8 | 1.25 | 6.0 | 16 | 6.0 | 60 | 4 |
| M10 | 1.0 | 8.0 | 20 | 8.0 | 60 | 4 |
| M10 | 1.25 | 8.0 | 20 | 8.0 | 60 | 4 |
| M10 | 1.5 | 8.0 | 20 | 8.0 | 60 | 4 |
| M12 | 0.75 | 10 | 24 | 10 | 75 | 4 |
| M12 | 1.0 | 10 | 24 | 10 | 75 | 4 |
| M12 | 1.25 | 10 | 24 | 10 | 75 | 4 |
| M12 | 1.5 | 10 | 24 | 10 | 75 | 4 |
| M12 | 1.75 | 10 | 24 | 10 | 75 | 4 |
| M14 | 1.5 | 12 | 28 | 12 | 75 | 4 |
| M14 | 2.0 | 11.6 | 28 | 12 | 75 | 4 |
| M16 | 1.5 | 14 | 32 | 14 | 100 | 4 |
| M16 | 2.0 | 13 | 32 | 14 | 100 | 4 |
| M20 | 1.5 | 16 | 38 | 16 | 100 | 4 |
| M24 | 3.0 | 16 | 42 | 16 | 100 | 4 |
Three Flute Teeth Thread Milling Cutter:
| Size | P | d1 | L1 | D | L | F |
| M3 | 0.5 | 2.4 | 7 | 6 | 50 | 4 |
| M4 | 0.7 | 3.2 | 9 | 6 | 50 | 4 |
| M5 | 0.8 | 3.9 | 12 | 6 | 50 | 4 |
| M6 | 1 | 4.7 | 14 | 6 | 50 | 4 |
| M8 | 1.25 | 6.2 | 18 | 8 | 60 | 4 |
| M10 | 1.5 | 7.5 | 23 | 8 | 60 | 4 |
| M12 | 1.75 | 9.0 | 26 | 10 | 75 | 4 |
Single Teeth Thread Milling Cutter:
| Cat.No | d1 | d2 | L1 | D | L | F |
| M1.2*0.25 | 0.9 | 0.63 | 3.2 | 4.0 | 50 | 2 |
| M1.4*0.3 | 1.05 | 0.7 | 3.5 | 4.0 | 50 | 3 |
| M1.6*0.35 | 1.2 | 0.8 | 4.0 | 4.0 | 50 | 3 |
| M2.0*0.4 | 1.55 | 0.9 | 6.0 | 4.0 | 50 | 3 |
| M2.5*0.45 | 1.96 | 1.3 | 6.5 | 4.0 | 50 | 4 |
| M3.0*0.5 | 2.35 | 1.6 | 8.0 | 4.0 | 50 | 4 |
| M4.0*0.7 | 3.15 | 2.1 | 10 | 4.0 | 50 | 4 |
| M5.0*0.8 | 3.9 | 2.8 | 12 | 4.0 | 50 | 4 |
| M6.0*1.0 | 4.8 | 3.4 | 15 | 6.0 | 50 | 4 |
| M8.0*1.25 | 6.0 | 4.2 | 20 | 6.0 | 60 | 4 |
| M10*1.5 | 7.7 | 5.6 | 25 | 8.0 | 60 | 4 |
| M12*1.75 | 9.6 | 7.3 | 30 | 10 | 75 | 4 |
| M14*2.0 | 10 | 7.3 | 36 | 10 | 75 | 4 |
Meiwha Threaded Milling Cutter
Sharp and Without Burrs
Strong and durable:
With a hard alloy substrate and a special coating, it is wear-resistant and heat-resistant, capable of processing high-hardness materials. Its durability exceeds that of taps, significantly reducing tool change and machine adjustment time.
Single teeth are inexpensive and have a wide range of processing options:
It can process different pitches, and there is no rotation direction restriction for internal and external threads with any straight shank. Moreover, it can process blind holes, thereby reducing procurement costs.
Three flute teeth have a high cost perform ance ratio and ate more efficient than single teeth:
The first flute is milled and then the following two flutes are ground. However, they cannot be adjusted. The processing is of fixed pitch and features a gap avoidance design.
The entire flute is formed in one go, with high efficiency:
Advantage: Suitable for high efficiency processing of large quantities of threads
Disadvantage: Cannot be adjusted, fixed pitch
